Vacuum glass build a better transparent envelope for ultra-low energy buildings

In recent years, the building energy conservation market has experienced unprecedented expansion. According to the requirements of the country's high-quality development, the requirements for materials, technologies and industrial upgrading for building energy conservation are also getting higher and higher. From building design, building material production and processing, building construction, supporting The assembly of facilities and subsequent maintenance provide new opportunities and challenges for the entire life cycle of the building materials industry.

vacuum-insulated-glass-building

For the transparent part of the building envelope, the ultra-low energy building not only bears the requirements of lighting, but also minimizes heat gain in summer and heat loss in winter; according to relevant statistics, the transparent building envelope (doors and windows, etc.) The influence rate of building energy consumption is up to 40%. Ultra-low energy consumption buildings put forward thermal insulation requirements for the light-transmitting part of the building envelope. In addition to meeting the low heat transfer coefficient, it is also necessary to ensure that there is enough solar heat gain in winter to reduce the heating pressure in winter. Therefore, the glass is required to have sufficient permeability. Ordinary glass cannot meet this standard. After many experiments and data tests, Zerothermo team found that vacuum glass (Tempered Vacuum insulated Glass) can fully meet these requirements.

vacuum-glass-building

For traditional insulating glass, even if double-silver Low-E glass is used, the heat transfer coefficient of single hollow structure is still high. Mild climate type. In order to reduce the heat transfer coefficient, a three-glass two-cavity double Low-E structure will be made, which will significantly affect the solar radiation heat gain, which can only be applied to areas with hot summers and warm winters without rigid requirements for winter heating, and will seriously affect the glass The visible light transmittance, that is, the glass permeability decreases. The vacuum glass can meet the requirements of low heat transfer coefficient and high solar radiation heat gain at the same time. Profiles and wall materials. And only one piece of Low-E structure is used, which can retain the transparency of the glass to the greatest extent, so that the actual user experience is better.

VIPs-thermal-panels

Sound Insulation & Noise Reduction

The vacuum layer of vacuum glass (insulated glass) effectively blocks the transmission of sound, and the composite vacuum glass can reach a maximum of 39 decibels, which is far superior to insulating glass. Vacuum glass can effectively block the transmission of sound, especially for medium and low frequencies with strong penetration, such as traffic noise, the effect is better.

Dust-Proof and Haze-Proof

The energy-saving doors and windows made of vacuum glass are made of high-quality auxiliary materials. At the same time, through fine production and installation, the ultra-high air tightness of the whole window is realized, and the window sash is gently closed to block the external environment. all pollution. No more dust and haze entering the home, ensuring the indoor health and cleanliness.

low-e-vacuum-glass
New tempered-glass

Thermal Insulation

the vacuum layer of vacuum glass can reach 10^(-2)pa, which effectively prevents heat conduction. The indoor lighting and shading can be adjusted to effectively reduce energy consumption and improve indoor comfort.

High Efficiency & Energy Saving

Due to the excellent thermal insulation performance of vacuum glass and energy-saving aluminum materials to make vacuum energy-saving doors and windows, its performance will easily meet the needs of passive houses.

Anti-Condensation

When vacuum glass is used in buildings, when the relative humidity is 65% and the indoor temperature is 20 °C: the temperature can be reduced to below -35 ℃.

vacuum insulation panels fatory

Zerothermo focus on vacuum technology for more than 20 years, our main products : vacuum insulation panels based on fumed silica core material for vaccine, medical, cold chain logistics, freezer, integrated vacuum insulation and decoration panel,  vacuum glass, vacuum insulated doors and windows. If you want to learn more information about Zerothermo vacuum insulation panelsplease feel free to contact us, also you are welcome to visit to our factory.

Sale manager: Mike Xu

Phone :+86 13378245612/13880795380

E-mail:mike@zerothermo.com

Website:https://www.zerothermovip.com


Post time: Nov-01-2022